Skip to main content

Custom size gingerbread house template generator (prints true scale)

Enter the size of the house you want. The page draws the two gable walls, two side walls and two roof panels at actual size and splits them over printable pages. Cut the paper pieces out, lay them on the rolled dough and cut around them.

Print at 100% ("Actual size"). The check square on each page measures 2 cm.

More options: paper, roof, joints
Baking sheet and dough density

A US half sheet pan is about 18 × 13 in, a quarter sheet 13 × 9 in. European oven trays vary, so measure the flat inside of yours. Pieces get about 2 cm between them and from the rim.

Dough
1,211 g
Baking sheets
3
Pages
–

969 g of dough goes into the pieces, 1345 cm² of it. The figure above adds 25% for trimmings.

Pattern pieces and their sizes
PieceCutSize (width × height)
Front and back wall215 × 17.5 cm
Side wall218.8 × 10 cm
Roof panel223 × 12.1 cm

Walls 10 cm high at the eaves, 17.5 cm at the peak, roof pitch 45°.

Preview

Dashed boxes are the printed pages. Neighboring pages share a gray strip, so you can line them up.

The preview needs JavaScript. The piece sizes above are still right.

Print at 100% ("Actual size"). The check square on each page measures 2 cm.

How it works

Width and depth are the outside of the walls. The gable walls (front and back) are pentagons: a rectangle as tall as the walls with a triangle on top for the roof. The pitch sets how steep that triangle is. At 45° the roof rises half the house width.

The roof panels run the full depth plus the overhang at both ends, and reach from the ridge down past the wall by the overhang.

Set the wall height to 0 for an A-frame. The side walls go away, the front and back become plain triangles, and the roof panels reach from the ridge down to the base.

Dough has thickness, so two walls meeting at a corner overlap by that much. If the side walls sit between the front and back walls, they are cut shorter by two thicknesses. If they cover the front and back edges, the gable walls get narrower instead. Either way the house comes out at the size you typed. The assembly guide shows both joints.

The dough figure is the area of all six pieces times the thickness times the density, plus 25% for scraps. Gingerbread puffs and spreads a little in the oven, so lay the paper piece back on the hot sheet and trim the edges straight while the dough is still soft.

More help

Was this page useful?